EVOLUTION II
EVOLUTION I I is the second high resolution ink jet printer in the EVOLUTION series. It features a complete software package, a backlit WYSIWYG display, up to four lines of print and eight built in barcode symbologies.
 | Complete System: EVOLUTION is complete and ready to install right out of the box. The system includes the mounting bracketry, a hand held controller with tactile style keypad for message entry and the printhead module with internal product sensor. |
|
Ink Jet Technology by Hewlett Packard: Based on the proven Hewlett Packard thermal ink jet printhead, EVOLUTION delivers bold, fully formed characters from the first print to the last. |
| Optimum Print Resolution: EVOLUTION gives you a full 300 DPI at production line speeds of up to 200 feet per minute. |
| Variable Character Heights: Two character heights are supplied as standard on EVOLUTION. Print a one line message in 1/2" characters, or two lines of 7/32". Selecting the character size is accomplished through the font key on the hand held controller. |
|
Ink Supply: Built into the printhead is a 42cc ink reservoir. Once the ink in the cartridge has been depleted, it can be taken out, disposed of and a new ink cartridge inserted in just seconds. |
| Optimum Print Resolution: EVOLUTION gives you a full 300 DPI at production line speeds of up to 200 feet per minute. |
| Variable Character Heights: Four character heights are supplied as standard on EVOLUTION. Print a one line message in 1/2" characters, two lines of 7/32", three lines of 1/8" and four lines of 3/32" high characters. Selecting the character size is accomplished through the font key on the hand held controller. |
|
Ink Supply: Built into the printhead is a 42cc ink reservoir. Once the ink in the cartridge has been depleted, it can be taken out, disposed of and a new ink cartridge inserted in just seconds. |
|
Add-On Printheads: Adding another printhead is a simple as sliding it on. Each printhead module is manufactured with a dovetail slot on one side and a dovetail slide on the other. Up to three additional printheads can be attached on a single bracket by inserting the slide on one into the slot on the other. A small RS485 data cable is then used to connect the modules. This allows the hand held controller to network all of the printheads on the production line. |
| Customized: EVOLUTION can be easily customized to fit each individual users requirements. Font styles, character heights (different than the standard 1/2", 7/32", 1/8", 3/32"), and logos can be supplied and easily added with optional data flash cards. Additional software is not required with EVOLUTION I I because all of the optional software packages available in EVOLUTION I are already built in. |
| Fully Compatible: The controller used for EVOLUTION I I is fully compatible with both EVOLUTION I and EVOLUTION Small Character Printer. This means that one single controller can be used to communicate with all of the EVOLUTION printers being used. |
| Net Working Capabilities: The hand held controller is capable of controlling up to 32 individual printhead modules through the use of a RS 485 data cable. A small data cable is used to connect the printhead on the same production line, while a longer cable connects them to the printers on the next production line in the manufacturing area. Complete PC control of the EVOLUTION network can be accomplished with our optional EVOLUTION-NET software. |
| One Year Warranty: A One Year Warranty is standard on EVOLUTION and covers any defect in material or workmanship from date of shipment. |